Purpose and Specifications

EUROL Ecopower 5W-20 is a fully synthetic engine oil engineered for modern Ford EcoBoost petrol engines and compatible with Jaguar and Land Rover vehicles. This low-viscosity oil delivers fuel efficiency without compromising engine protection.

Key Performance Benefits:

• Fuel economy improvement through reduced engine friction
• Quick cold-start protection—builds a stable lubricating film instantly at temperatures as low as -42°C
• Thermal stability under heavy-duty conditions, maintaining protection at high operating temperatures
• Advanced additives prevent rust, corrosion, sludge, and internal deposits
• Extended oil change intervals when recommended by your vehicle manufacturer

Approvals: API SN, ACEA A1/B1, Ford WSS-M2C948-B, Jaguar/Land Rover STJLR.03.5004, ILSAC GF-5

When to Use and Replace

Use this oil in Ford EcoBoost engines and any petrol engine requiring ACEA A1/B1 or API SN specifications. Always verify your vehicle's owner manual for the correct oil grade.

Replacement Schedule: Follow your manufacturer's recommended oil change intervals, typically 10,000–15,000 km or 6–12 months, whichever comes first. EUROL Ecopower supports extended intervals when your vehicle manufacturer permits.

Operating Temperature Range: Effective from -42°C (cold start) to over 100°C (normal engine operation).

Storage: Store in a cool, dry place. Shelf life is typically 3–5 years in sealed, unopened containers.

Frequently Asked Questions

Q: Can I use 5W-20 if my car previously used 5W-30?
A: Yes, if your owner's manual approves ACEA A1/B1 or API SN oils. The 5W-20 flows more easily at cold temperatures, improving fuel economy. Always confirm your vehicle's specifications first.

Q: Is this oil suitable for extended oil change intervals?
A: Yes, EUROL Ecopower 5W-20 is formulated for extended intervals when your manufacturer recommends them. Check your service manual for your vehicle's specific interval.

Q: Why is low viscosity important?
A: Low viscosity means the oil flows more freely through the engine, reducing friction and heat. This improves fuel efficiency and provides faster protection during cold starts, especially in winter.